3
Storage
The following requirements should be met when the SUN2000 needs to be stored
prior to installation:
●
Do not remove the packing materials, and check the packing materials
regularly (recommended: every three months). If any rodent bites are found,
replace the packing materials immediately. If the solar inverter is unpacked
but not put into use immediately, put it inside the original package with the
desiccant bag, and seal it using tape.
●
The ambient temperature and humidity should be suitable for the storage.
The air must not contain corrosive or flammable gases.
●
The solar inverter should be stored in a clean and dry place and be protected
from dust and water vapor corrosion. The solar inverter must be protected
against rain and water.
●
Do not tilt the package or place it upside down.
●
To avoid personal injury or device damage, stack inverters with caution to
prevent them from falling over.
SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
3 Storage
Issue 06 (2020-10-12)
Copyright © Huawei Technologies Co., Ltd.
17