manualshive.com logo in svg

Huawei SUN2000-20KTL-M3, User Manual

Share
Download
Huawei SUN2000-20KTL-M3 User Manual Download Page 43

Figure 5-8 Connecting the DC power cable

----End

5.6 (Optional) Installing the Smart Dongle

Procedure

NO TE

● The WLAN-FE Smart Dongle is not provided in standard configuration.
● If your Smart Dongle is a WLAN-FE Smart Dongle or is configured with a SIM card, skip

this step. The configured SIM card can be used only on the Smart Dongle. The SIM card

is a China Mobile card. Before installation, check whether the site is effectively covered

by China Mobile signals. If not, prepare a SIM card of other carriers.

● If your Smart Dongle is not equipped with a SIM card, prepare a standard SIM card

(size: 25 mm x 15 mm) with the capacity greater than or equal to 64 KB.

● When installing the SIM card, determine its installation direction based on the silk

screen and arrow on the card slot.

● Press the SIM card in place to lock it, indicating that the SIM card is correctly installed.
● When removing the SIM card, push it inwards to eject it.
● When reinstalling the cover of the Smart Dongle, ensure that the buckle springs back in

place.

●

4G Smart Dongle

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-

M3

User Manual

5 Electrical Connections

Issue 01 (2020-10-15)

Copyright © Huawei Technologies Co., Ltd.

37

Summary of Contents for SUN2000-20KTL-M3
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands