Huawei SUN2000-10KTLM1 User Manual Download Page 16

Page: 16 / 124

NO TE

● If the built-in WiFi module of the SUN2000 connects to the app, only device commissioning

can be performed.

● In the SUN2000 cascading scenario, the master inverter model can be SUN2000-

(3KTL-10KTL)-M1, and the slave inverter model can be SUN2000-(3KTL-10KTL)-M1,

SUN2000-(5KTL–20KTL)-M0, SUN2000-50KTL/60KTL/65KTL-M0, SUN2000-29.9KTL/36KTL,

or SUN2000-33KTL-A.

Supported Power Grid Types

The SUN2000 supports TN-S, TN-C, TN-C-S, TT, and IT power grids.

Figure 2-3 Power grid types

NO TE

● When the SUN2000 is used in the TT power grid, the N-to-PE voltage must be less than

30 V.

● When the SUN2000 is used in the IT power grid, set Isolation to Input ungrounded,

with TF.

2.2 Appearance

SUN2000-(3KTL-10KTL)-M1

User Manual

2 Overview

Issue 02 (2020-11-20)

Summary of Contents for SUN2000-10KTLM1





























































































































Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands

Huawei SUN2000-10KTLM1, User Manual

Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands