SmartLogger1000
User Manual
7 WebUI
Issue 12 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
224
Parameter
Description
Start Current (mA)
Indicates the valid value range of signals carried by the
analog output loop. The current range is less than or equal to
the current range set in the AO specifications.
Start Data
corresponds to
End Data
.
End Current (mA)
Start Data
Indicates the valid value range of signals of
Feedback
Parameter
. Set the two parameters as required. An excessive
range results in low precision of the feedback while an
insufficient range results in the incompleteness of the
feedback.
End Data
7.10.2.4 Setting Management System Parameters
To set parameters correctly, ensure that the SmartLogger can connect to Huawei management
systems, such as NetEco and FusionSolar, or a third-party management system.
Because of permission restriction, log in as
Advanced User
. Choose
Settings
>
Management System
to access the page.
Figure 7-48
Setting management system parameters
Set
Server
to the IP address or domain name of the management system server.
If the SmartLogger connects to the Huawei management system, retain the default value 16100 for
Port number
. If it connects to a third-party management system, set
Port number
based on the
server port enabled in the third-party management system.
Generally,
Address mode
is set to
Comm. Address
. If the devices connected to the three RS485
ports on the SmartLogger have duplicate addresses,
Address mode
must be set to
Logical address
.
If
SSL encryption
is set to
Disable
, data will be transmitted without being encrypted, which may
result in user data theft. Therefore, exercise caution when deciding to set
SSL encryption
to
Disable
.
If
Second challenge authentication
is set to
Disable
, the second challenge authentication result will
not be verified, which may result in user data theft. Therefore, exercise caution when deciding to set
Second challenge authentication
to
Disable
.
Obtain the documents about security certificate from the management system.
