Table 7-26
Overseas parameters supported by the MA5616
Parameter
Description
Default Setting
0
Indicates the upper threshold of
the flash-hooking duration.
350 ms (in compliance with the
Chinese mainland standards)
1
Indicates the lower threshold of
the flash-hooking duration.
100 ms (in compliance with the
Chinese mainland standards)
2
Indicates whether the current is
limited when the user port is
locked.
0: Indicates that the current is not
limited.
3
Indicates the type of ring DC
offset.
Line B offset
Procedure
Step 1
Run the
oversea parameters
command to configure the overseas parameters.
Step 2
Run the
display oversea parameters
command to check whether the overseas parameters are
the same as the planned data.
----End
Example
To set the upper flash-hooking threshold (overseas parameter 0) to 800 ms (in compliance with
the Hong Kong standards) and the lower flash-hooking threshold (overseas parameter 1) to 100
ms (in compliance with the Hong Kong standards), do as follows:
huawei(config)#
oversea parameters 0 800
huawei(config)#
oversea parameters 1 100
huawei(config)#
display oversea parameters
{ <cr>|name<U><0,3> }:
Command:
display oversea parameters
-----------------------------------------------------------------------------
Parameter name index: 0 Parameter value: 800
Mean: Hooking upper threshold(ms), reference: China:350, HongKong:800
-----------------------------------------------------------------------------
Parameter name index: 1 Parameter value: 100
Mean: Hooking lower threshold(ms), reference: China:100, HongKong:100
-----------------------------------------------------------------------------
Parameter name index: 2 Parameter value: 0
Mean: Flag of applying PARKED LINE FEED or not when user port is locked, 0:not
apply, 1:apply
-----------------------------------------------------------------------------
Parameter name index: 3 Parameter value: 1
Mean: Type of ring DC offset, 0:Line A offset, 1:Line B offset
-----------------------------------------------------------------------------
7.3.3.4 (Optional) Configuring the Attributes of an ISDN BRA Port
This topic describes how to configure the attributes of an ISDN BRA port to ensure that the
ISDN BRA port can meet the actual application requirements. You can configure the auto-
deactivation status, remote power supply status, UNI fault alarming function, and working mode
of the port.
SmartAX MA5616 Multi-service Access Module
Configuration Guide
7 Configuring the Voice Service
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
295
