Table 7-22
Digitmap format in the H.248 protocol
Digit or
Character
Description
0-9
Indicate dialed digits 0-9.
A-D
Indicate A-D.
E
Indicates * in the DTMF mode.
F
Indicates for # in the DTMF mode.
X
Indicates for a wildcard, indicating any digit from 0 to 9.
S
Indicates the short timer. When detecting the timer timeout, the system reports
a phone number digit by digit if the phone number is detected after the dialing
scheme is matched. The short timer is applied when the collected number
matches at least one dialing scheme, but more numbers may be received and
these numbers match other dialing schemes.
L
Indicates the long timer. When detecting the timer timeout, the system reports
a phone number digit by digit if the phone number is detected after the dialing
scheme is matched. The long timer is applied when the dialed number does
not match any dialing scheme.
Z
Indicates the duration modifier, which indicates a dialing event of a long
duration. It is before the event character with a fixed location. When the event
duration exceeds the threshold, the dialing event fills the location.
.
Indicates that there can be multiple digits (including 0) or characters before
it.
|
Used to separate the strings and indicates that each string is an optional dialing
scheme.
[]
Indicates that one digit or string can be selected from the options.
Procedure
Step 1
Enter the MG interface mode.
In global config mode, run the
interface h248
command to enter the MG interface mode.
Step 2
Configure the digitmap.
Run the
digitmap set
command to configure the digitmap required in the data plan.
Step 3
(Optional) Configure the digitmap timer.
Run the
digitmap-timer
command to configure the digitmpa timer.
Generally, the digitmap is issued by the MGC. In this case, the issued digitmap timer prevails
regardless of whether a timer is configured on the AG. When the MGC does not issue the
digitmap timer and the default digitmap timer does not meet the service requirements, you can
configure the digitmap timer in this step.
SmartAX MA5616 Multi-service Access Module
Configuration Guide
7 Configuring the Voice Service
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
275