Item
Remarks
User type
According to the service requirements, user
type needs to be specified. The user type
includes the following:
l
DEL: direct exchange lines (default)
l
ECPBX: earth calling PBX
l
LCPBX: loop calling PBX
l
PayPhone: pay phone
Common
Parameter
System parameter
The system parameters, including the
international version flag and message
waiting indication (MWI) mode, need to be
configured according to local standards to
ensure that the response of the user terminal
complies with the local standards.
International parameters
The attributes such as the upper and lower
thresholds of the flash-hooking duration
need to be configured according to the local
standards to ensure that the response of the
user terminal complies with the local
standards.
PSTN port attributes
If the PSTN port needs to support the polarity
reversal accounting, the PSTN port needs to
be configured to support the polarity reversal
pulse. Other attributes do not need to be
modified if there is no special requirement.
Ringing current attributes
When the attributes of ring current are
changed, ring volume is changed. This
parameter needs to be modified according to
the local standard only when the default ring
current attribute does not comply with the
local standard.
11.2.6 Principle of IPTV Service Data Plan
The IPTV service plan mainly includes the plan of VLANs and VLAN translation policies in
different network scenarios, and the plan of IPTV services.
IPTV services include multicast service and VoD service. These two services have relationships
and independence in VLAN planning.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
846
