NOTICE
An ETHB board resets if its working mode switches from
extend
to other modes or from other
modes to
extend
.
Step 3
Add a remote extended subrack in offline mode.
huawei(config)#
frame add 1 MA5623AR extend-port 0/3/0
----End
Follow-up Procedure
After being powered on, the extended subrack automatically communicates with the master
subrack to complete registration, and enters the normal state. Then, the master subrack can
manage the extended subrack.
NOTE
In automatic discovery mode, perform the following operations to add a remote extended subrack:
l
Run the
display network-role
command to check whether the working mode of the ETHB board is
extend
l
If the working mode is not
extend
, run the
network-role
command to set the working mode to
extend
.
Note that mode switching will reset the ETHB board.
l
Run the
frame confirm
command to confirm the extended subrack. Then, the extended subrack enters
the normal state.
11.4.2.5 Configuring VDSL2 User Ports
This topic describes how to activate VDSL2 ports and bind a VDSL2 profile to the ports for
service transmission.
Data Plan
Data plan for VDSL2 user ports focuses on line parameters, such as spectrum profile, OSNR
tolerance, and maximum interleave delay. The parameter plan for VDSL2 ports on a GE remote
extended subrack is the same as that for VDSL2 ports on the master subrack. For details, see
"Configuring VDSL2 Profiles" in
MA5600T/MA5603T Configuration Guide
.
Procedure
Step 1
Select a default VDSL2 profile ID, or configure a VDSL2 profile according to service
requirements.
Step 2
Activate the VDSL2 user ports.
1.
Run the
activate
command to activate the VDSL2 ports, and then bind a line profile (non-
line-alarm profile) to the VDSL2 ports. Note that the format of the
activate
command varies
with the VDSL2 modes (TR129, TI, or TR165).
2.
Run the
alarm-config
command to bind a line alarm profile to the VDSL2 ports.
----End
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1049
