processing the changes. Instead, the RM waits for a certain period, and then notifies various
protocols of applying the changed routing policy.
l
If the routing policy changes again during the waiting time, the RM resets the timer.
You can run related commands to set the waiting time as required.
Pre-configuration Tasks
None.
Data Preparation
To configure the valid time of the routing policy, you need the following data.
No.
Data
1
Delay for applying the routing policy
10.8.2 Configuring the Delay for Applying the Routing Policy
When modifying multiple cooperative routing policies, you need to configure the delay for
applying a routing policy.
Context
Do as follows on the switch on which the delay for applying routing policy needs to be changed:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
route-policy-change notify-delay
delay-time
The delay for applying the routing policy is set.
The delay ranges from 1 to 180, in seconds.
By default, the RM immediately notifies the protocol of applying the new policy when the routing
policy changes.
Step 3
Run:
quit
Back to the user view.
Step 4
(Optional) Run:
refresh bgp
all
{
export
|
import
}
BGP is configured to apply the new routing policy.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
10 Routing Policy Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
615
