manualshive.com logo in svg

Huawei S6700 Series, Configuration Manual

Share
Download
Huawei S6700 Series Configuration Manual Download Page 334

Step 2

Run:

isis

 [ 

process-id

 ]

The IS-IS view is displayed.

Step 3

Run:

graceful-restart interval

 

interval-value

The interval for reestablishing an IS-IS GR session is set.

The restart interval is set to the Holdtime in an IS-IS Hello PDU. Thus, the adjacency relationship
is not torn down when the switch restarts. By default, the restart period is 300 seconds.

Step 4

(Optional) Run:

graceful-restart suppress-sa

The GR restarter is configured to suppress the Suppress-Advertisement (SA) bit of the restart
TLV.

To prevent a switch from suppressing the SA bit in a Hello PDU during the active/standby
switchover, the administrator can run the 

undo graceful-restart suppress-sa

 command.

By default, the SA bit is not suppressed.

----End

6.16.4 Checking the Configuration

After configuring IS-IS GR, you can check the IS-IS GR status and parameters.

Prerequisites

The configurations for IS-IS GR are complete.

Procedure

Step 1

Run 

display isis graceful-restart status

 [ 

level-1

 | 

level-2

 ] [ 

process-id

 | 

vpn-instance

 

vpn-

instance-name

 ] command to check the status of IS-IS GR.

----End

6.17 Maintaining IS-IS

Maintaining IS-IS involves resetting IS-IS and clearing IS-IS statistics.

6.17.1 Resetting IS-IS Data Structure

By restarting IS-IS, you can reset IS-IS. You can also reset IS-IS in GR mode.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

6 IS-IS Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

315

Summary of Contents for S6700 Series

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands