manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 135

6.2 iBMC

The iBMC is a Huawei's proprietary system that remotely manages servers. iBMC complies
with IPMI 2.0 and SNMP standards and supports various functions, including KVM
redirection, text console redirection, remote virtual media, and hardware monitoring and
management.

iBMC provides the following functions:

l

Remote control

iBMC controls the servers using the KVM, SOL, and virtual media functions.

l

Alarm management

iBMC receives and handles the alarms reported by the field replacement units (FRUs).

l

Status monitoring

iBMC monitors the operating status of the FRUs.

l

Device information management

iBMC provides the function of querying the information about the device version,
model, and asset information.

l

Heat dissipation control

iBMC dynamically adjusts the rotational speed of the fans based on the ambient
temperature and the workload.

l

IPMItool for device management

iBMC supports the commands released by the IPMItool.

l

Support for management over the WebUI

iBMC provides a user-friendly and simple Web interface for ease of management. On the
Web interface, you can perform setting and querying tasks quickly.

l

Centralized account management

iBMC stores user accounts on the Active Directory server in a centralized manner and
directs the authentication to the server. In this way, you can log in to the management
system using a domain account.

For details about iBMC, see the 

Huawei Rack Server iBMC User Guide

.

6.3 Upgrading Software

NOTE

Upgrade server drivers, firmware, or management software if the current versions cannot meet
requirements.

Obtaining the Upgrade Package and Documents

Obtain the upgrade package from 

http://e.huawei.com/en/

.

RH2288 V3 Server
User Guide

6 Software and Configuration Utility

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

123

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands