Huawei R2561 User Manual Download

Page: 60 / 64

IDU R2561
User Guide

4 Reference Manual

Issue 01 (2019-02-28)

the available clients.



PIN

In Wi-Fi Protected Setup networks, a unique PIN (Personal Identification Number) will
be required for each device to join the network.

−

PIN code:

Another client would provide 4 or 8 PIN codes. Please insert the specific WPS client
PIN code accordingly and the start icon would show up.

−

Start

After input the PIN code then press the start, WPS will start and trying to connecting
with the available clients.

4.5.4 Wi-Fi > Connected Client

Figure 4

‑

Connected Client

Device Name

Wi-Fi client's name.

IP Address

Wi-Fi client gotten IP address from device.

MAC Address

Wi-Fi client's MAC address.

Mode

Wi-Fi client's use working mode to connect to device.

RSSI(dBm)

Received Signal Strength Indication.

Speed(Mbps)

Support maximum speed.

Summary of Contents for R2561

































































Search results

Summary of Contents for R2561

Reviews:

Related manuals for R2561

Brands by name

Popular brands

Huawei R2561, User Manual

Search results

Summary of Contents for R2561

Reviews:

Related manuals for R2561

Brands by name

Popular brands