1.14.1 Establishing the Configuration Task
Before configuring SNMP maintenance information, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
When the switch prompts errors that are urgent to be removed, contact the local maintenance
engineers.
Pre-configuration Tasks
Before configuring SNMP maintenance information, complete the following tasks:
l
Assigning an IP address to the switch
l
Configuring the routing protocol to make the switch and the NM Station accessible
Data Preparation
To configure SNMP maintenance information, you need the following data.
No.
Data
1
Identity and contact method of the administrator
2
Location of the switch
1.14.2 Configuring Contact Methods of the Administrator
This part describes how to configure the administrator information. In the case of device failure,
you can contact the administrator for help.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
snmp-agent sys-info
contact
contact
The contact method of the administrator is configured.
----End
1.14.3 Configuring the Location of the switch
This part describes how to assign an address to the device. In the case of device failure, you can
locate the faulty device in time.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1 SNMP Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-45
