Command Manual – MPLS
Quidway S8500 Series Routing Switches
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-42
Parameter
group-name
: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
peer-address
: Peer IP address in dotted decimal format.
policy-name
: Name of the applied routing policy.
Description
Use the
peer route-policy import
command to apply a routing policy to peer for
received routing information.
Use the
undo peer route-policy import
command to delete the setting.
By default, there is no routing policy.
The incoming filtering policy configured for peers take precedence over the
configuration for peer groups.
Related command:
peer route-policy export
.
Example
# Apply the routing policy test-policy to the incoming routes of the peer group test.
[Quidway-bgp] ipv4-family vpnv4
[Quidway-bgp-af-vpn] peer test route-policy test-policy import
2.1.50 peer route-update-interval
Syntax
peer
group-name
route-update-interval seconds
undo peer
group-name
route-update-interval
View
VPN-instance subaddress family view
Parameter
group-name
: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
seconds
: Update interval in seconds, ranging from 0 to 600.
Description
Use the
peer route-update-interval
command to set the Update interval for peers.
Use the
undo peer route-update-interval
command to restore the default setting.
By default, the Update interval is 5 seconds for IBGP peer group, and for EBGP it is 30
seconds.