Command Manual - VLAN
Quidway S6500 Series Ethernet Switches
Chapter 2 GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-5
is interface name. For their meanings and value range, read Parameter Description of
“Port” in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using
reset garp statistics
command, you can reset the GARP statistics information
(such as the received/sent packets or discarded packets by GVRP/GMRP). If the
command has no parameter, it will clear the GARP statistics information of all the ports.
For the related command, see
display
garp statistics
.
Example
# Clear GARP statistics information.
<Quidway> reset garp statistics
2.2 GVRP Configuration Command
2.2.1 display gvrp statistics
Syntax
display gvrp statistics
[
interface interface-list
]
View
Any view
Parameter
interface-list
: List of Ethernet port to be displayed, expressed as
interface -list
=
{ {
interface_type interface_num | interface_name
} [
to
{
interface_type interface_num
| interface_name
} ] }&<1-10>.
interface_type
is interface type,
interface_num
is
interface number and
interface_name
is interface name. For their meanings and value
range, read command parameters description of “Port” in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using
display gvrp statistics
command, you can view the GVRP statistics information
of all the Trunk ports, including the list of ports enabled with GVRP, GVRP status
information, failed GVRP registration entries and the last GVRP data unit origin etc.
Example
# Display the GVRP statistics information about Ethernet1/0/1.
