Command Manual - VLAN
Quidway S6500 Series Ethernet Switches
Chapter 2 GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-2
2.1.2 display garp timer
Syntax
display
garp timer
[
interface interface-list
]
View
Any view
Parameter
interface-list
: List of Ethernet port to be displayed, expressed as
interface -list
=
{ {
interface_type interface_num | interface_name
} [
to
{
interface_type interface_num
| interface_name
} ] }&<1-10>.
interface_type
is interface type,
interface_num
is
interface number and
interface_name
is interface name. For their meanings and value
range, read command parameters description of “Port” in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using
display garp timer
command, you can view the value of GARP timer, including
Hold timer, Join timer, Leave timer and LeaveAll timer.
For the related command, see
garp timer
,
garp timer leaveall
.
Example
# Show GARP timer on Ethernet1/0/1.
<Quidway> display garp timer interface ethernet1/0/1
GARP timers on port Ethernet1/0/1
GARP JoinTime : 20 centiseconds
GARP Leave Time : 60 centiseconds
GARP LeaveAll Time : 1000 centiseconds
GARP Hold Time : 10 centiseconds
2.1.3 garp timer
Syntax
garp timer
{
hold
|
join
|
leave
}
timer_value
undo garp timer
{
hold
|
join
|
leave
}
View
Ethernet port view
