Command Manual - VLAN
Quidway S6500 Series Ethernet Switches
Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-8
1.3 Protocol-Based VLAN Configuration Commands
1.3.1 display protocol-vlan interface
Syntax
display protocol-vlan interface
{ {
interface-type interface-number
|
interface-name
}
[
to
{
interface-type interface-num | interface-name
} ] |
all
}
View
Any view
Parameter
{
interface_type interface_num | interface_name
} [
to
{
interface_type interface_num |
interface_name
} ]: Specifies ports. You can specify multiple sequential ports with the
to
parameter, instead of specifying only one port.
interface_name
specifies port name, in
the format of
interface_name
=
interface_type interface_num
.
interface_type
specifies
port type and
interface_num
port number.
all
: Displays the protocol information of all ports.
Description
Using the
display protocol-vlan interface
command, you can view the protocol
information and protocol index configured on the specific port, to which you can refer
when you use the protocol-based VLAN and add/delete a protocol.
For the related commands, see
display interface
.
Example
# Display the protocol information and protocol index configured on Ethernet1/0/1 and
Ethernet1/0/2.
[Quidway] display protocol-vlan interface ethernet1/0/1 to ethernet1/0/2
Interface: Ethernet1/0/1
VLAN ID
Protocol-Index Protocol-type
50
1 ip 192.168.10.1 255.255.255.0
80
2 ip 101.120.34.0 255.255.0.0
100
1 ip 104.232.43.0 255.255.255.0
100
2 ipx ethernetii
Interface: Ethernet1/0/2
VLAN ID
Protocol-Index Protocol-type
50
5 ipx raw
80
1 at
100
3 mode snap etype 0x0abc
100
5 mode llc dsap 0xac ssap 0xbd
