Huawei Quidway S5000 Series Routine Maintenance Download Page 52

Page: 52 / 68

Parameter

Description

Running
Status

This parameter indicates the running status of the PEM. There are the
following options:

Normal

: indicates that the power supply is running normally.

Power off

: indicates that the power supply is not connected.

Fault

: indicates that the power supply is faulty and cannot supply power

normally.

Absent

: indicates that the power supply is absent.

Over Voltage

: indicates that the input voltage of the power supply exceeds

the rated voltage of devices.

Under Voltage

: indicates that the input voltage of the power supply is less

than the rated voltage of devices.

Temperature
Status

This parameter indicates the temperature status of the PEM. The status can
be

Normal

and

Over Temperature

NOTE

Over Temperature

indicates that the PEM detects an overhigh temperature.

Type

This parameter indicates the PEM type. There are two options:

ACM

and

DCNM

Power
Version

This parameter indicates the version of the PEM software.

Vendor

This parameter indicates the manufacturer of the PEM.

Production
Date

This parameter indicates the production date of the PEM.

----End

Exception Handling

If the running status of the PEM is

Fault

, see “

The PEM Status Is Abnormal

” in the

OceanStor S5000 Series Storage System Alarm Reference

If an alarm that is related to the PEM is displayed on the alarm interface, handle it by
referring to the suggestion in the alarm items.

If the fault persists, contact the technical support engineers.

5.5 Checking the Status of the D200 Disk Subrack

This section describes how to check the D200 disk subrack through the OSM.

Reference Standard

No new alarms related to the disk subrack are displayed on the alarm interface.

The running status of all expander modules on the the disk subrack is

Normal

5 Routine Maintenance Guide of the OSM

OceanStor S5000 Series Storage System

Routine Maintenance

5-8

Huawei Proprietary and Confidential

Issue 01 (2010-04-20)

Summary of Contents for Quidway S5000 Series





































































Search results

Summary of Contents for Quidway S5000 Series

Reviews:

Related manuals for Quidway S5000 Series

Brands by name

Popular brands

Huawei Quidway S5000 Series, Routine Maintenance

Search results

Summary of Contents for Quidway S5000 Series

Reviews:

Related manuals for Quidway S5000 Series

Brands by name

Popular brands