Huawei Quidway S3100 Series Operation Manual Download Page 341

Page: 341 / 514

Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches

Chapter 1 IGMP Snooping Configuration

Huawei Technologies Proprietary

1-14

[Switch B-Ethernet 1/0/1] port hybrid vlan 2 10 untagged

[Switch B-Ethernet 1/0/1] port hybrid pvid vlan 2

[Switch B-Ethernet 1/0/1] quit

# Define the Ethernet 1/0/2 port as a hybrid port, add the port to VLAN 3 and VLAN 10,

and configure the port to exclude VLAN tags in its outbound packets for VLAN 3 and

VLAN 10, and set VLAN 3 as the default VLAN of the port.

[Switch B] interface Ethernet 1/0/1

[Switch B-Ethernet 1/0/2] port link-type hybrid

[Switch B-Ethernet 1/0/2] port hybrid vlan 3 10 untagged

[Switch B-Ethernet 1/0/2] port hybrid pvid vlan 3

[Switch B-Ethernet 1/0/2] quit

1.5 Troubleshooting IGMP Snooping

Symptom

: Multicast function does not work on the switch.

Solution

The reason may be:

IGMP Snooping is not enabled.

Use the

display current-configuration

command to check the status of IGMP

Snooping.

If IGMP Snooping is disabled, check whether it is disabled globally or on the

corresponding VLAN. If it is disabled globally, use the

igmp-snooping enable

command in both system view and VLAN view to enable it both globally and on the

corresponding VLAN. If it is only disabled on the VLAN, use the

igmp-snooping

enable

command in VLAN view to enable it on the corresponding VLAN.

Multicast forwarding table set up by IGMP Snooping is wrong.

Use the

display igmp-snooping group

command to check if the multicast groups

are expected ones.

If a multicast group created by IGMP Snooping is not correct, contact your

technical support personnel.

Continue with solution 3) if the second step does not work.

If it is not the reason, the possible reason may be:

Multicast forwarding tables do not match.

Use the

display mac-address vlan

vlanid

command in any view to check if the

MAC multicast forwarding table established under the specified VLAN is

consistent with that established by IGMP Snooping.

If they are not consistent, contact your technical support personnel.

Summary of Contents for Quidway S3100 Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands

Huawei Quidway S3100 Series, Operation Manual

Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands