Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Chapter 1 AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-11
Operation
Command
Description
Set the messenger function
messenger
time
{
enable limit interval
|
disable
}
Optional
By default, the
messenger function is
disabled.
Set the self-service server
location function
self-service-url
{
disable
|
enable
url-string
}
Optional
By default, the
self-service server
location function is
disabled.
Caution:
z
On an S3100 series switch, each access user belongs to an ISP domain. You can
configure up to 16 ISP domains on the switch. When a user logs in, if no ISP domain
name is carried in the user name, the switch assumes that the user belongs to the
default ISP domain.
z
When charging a user, if the system does not find any available accounting server
or fails to communicate with any accounting server, it will not disconnect the user as
long as the
accounting optional
command has been executed.
z
The self-service server location function must cooperate with a
self-service-supported RADIUS server (such as CAMS). Through self-service,
users can manage and control their accounts or card numbers by themselves. A
server installed with the self-service software is called a self-service server.
Note:
Huawei's CAMS Server is a service management system used to manage networks
and secure networks and user information. Cooperating with other network devices
(such as switches) in a network, the CAMS Server accomplishes the AAA
(authentication, authorization and accounting) services and rights management.
1.3.4 Configuring an AAA Scheme for an ISP Domain
You can configure an AAA scheme in one of the following two ways:
I. Configuring a bound AAA scheme
You can use the
scheme
command to specify an AAA scheme. If you specify a
RADIUS scheme, the authentication, authorization and accounting will be uniformly
