![Huawei Quidway NetEngine40E Configuration Manual - Reliability Download Page 1200](http://html.mh-extra.com/html/huawei/quidway-netengine40e/quidway-netengine40e_configuration-manual-reliability_1694531200.webp)
Procedure
Step 1
Configure a domain mapping list on the master and slave devices.
1.
Run:
system-view
The system view is displayed.
2.
Run:
aaa
The AAA view is displayed.
3.
Run:
domain
domain-name
A domain is created.
4.
Run:
domain-map-list
domain-map-list-name
A domain mapping list is created.
5.
Run:
domain
source-domain
mapping
destination-domain
A domain mapping is added to the domain mapping list.
Step 2
Configure domain mapping in an RBS.
1.
Run:
system-view
The system view is displayed.
2.
Run:
remote-backup-service
service-name
The RBS view is displayed.
3.
Run:
domain-map-list
domain-map-list-name
A domain mapping list is bound to the RBS.
----End
11.7.9 Checking the Configurations
After successfully configuring L2TP two-node hot backup, you can view L2TP two-node hot
backup configurations and statistics.
Context
Run the following commands to check the previous configuration.
Procedure
l
Run the
display remote-backup-profile
[
profile-name
] command to check RBP
information.
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
11 Multi-node Backup Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1183