![Huawei Quidway NetEngine40E Configuration Manual - Reliability Download Page 1175](http://html.mh-extra.com/html/huawei/quidway-netengine40e/quidway-netengine40e_configuration-manual-reliability_1694531175.webp)
The system view is displayed.
Step 2
Run:
peer-backup route-cost
auto-advertising
The BRAS is configured to use default cost values of routes to control route preference when
the routes are generated. The route can be an address pool UNR or a route to a loopback interface
of the LAC on an L2TP tunnel.
----End
Follow-up Procedure
To use a routing policy to allow the UNR of the primary address pool to be the highest, run the
import-route
unr route-policy
route-policy-name
command in the IS-IS, OSPF, or BGP view.
To persevere cost values of UNRs imported by a routing protocol, perform one of the following
steps based on the type of routing protocol:
l
Run the
import-route
unr inherit-cost
command in the IS-IS view.
l
In the OSPF view, run the following commands:
1.
default
cost inherit-metric
2.
import-route
unr
l
Run the
import-route
unr
command in the BGP view.
11.4.10 Checking the Configuration
After the configuration is complete, you can view details about the remote server and the remote
backup service type, which is BRAS.
Context
Run the following commands to check the previous configuration.
Procedure
l
Run the
display remote-backup-profile
profile-name
command to check information
about the remote backup profile.
l
Run the
display remote-backup-service
[
service-name
[
verbose
] ] command to check
information about the remote backup service.
l
Run the
display backup-user
[
user-id
user-id
|
username
user-name
] command to check
information about backup users.
l
Run the
display access-user interface
interface-type
interface-number
[
normal
| [
rui-
local
|
rui-remote
] [
master
|
slave
] ] command to check information about the access
users on a specified interface.
----End
Example
Run the
display remote-backup-profile
command to view information about the remote backup
profile, including the name of the remote backup service, name of the interface bound to a Virtual
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
11 Multi-node Backup Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1158