manualshive.com logo in svg

Huawei Quidway NE40E, Configuration Manual, Page: 779 / 1301

Share
Download
Huawei Quidway NE40E Configuration Manual Download Page 779

8.2 Configuring the Format of BGP 4-Byte AS Numbers

You can change the format of Border Gateway Protocol (BGP) 4-byte autonomous system (AS)
numbers to your desired format.

Applicable Environment

By default, a BGP 4-byte AS number is displayed in dotted notation. To use integral 4-byte AS
numbers, perform this configuration task to display 4-byte AS numbers as integers.

NOTICE

Changing the format of 4-byte AS numbers will affect matching results of AS_Path regular
expressions and extended community attribute filters. Therefore, if the system is using an
AS_Path regular expression or an extended community attribute filter as an import or export
policy, you must reconfigure an AS_Path regular expression using the 

ip as-path-filter

command or an extended community attribute filter using the 

ip extcommunity-filter

 command

after changing the format of 4-byte AS numbers. This reconfiguration ensures that routes match
the import or export policy.

l

If integral 4-byte AS numbers are configured, you must change 4-byte AS numbers in
AS_Path regular expressions and extended community attribute filters to integral 4-byte
AS numbers.

l

If 4-byte AS numbers in dotted notation are configured, you must change 4-byte AS
numbers in AS_Path regular expressions and extended community attribute filters to 4-byte
AS numbers in dotted notation.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

as-notation plain

BGP 4-byte AS numbers are configured to display in integers.

NOTE

After you run the 

as-notation plain

 command, BGP 4-byte AS numbers are displayed in integers in display

commands but are still displayed in dotted notation in the configuration file.

----End

Checking the Configurations

After configuring the format of BGP 4-byte AS numbers, perform the following operations to
check the configuration:

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing

8 BGP Configuration

Issue 02 (2014-09-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

754

Summary of Contents for Quidway NE40E






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments