manualshive.com logo in svg

Huawei Quidway NE40E, Configuration Manual

The Huawei Quidway NE40E is a high-performance networking device that offers advanced features for seamless connectivity. Enhance your understanding and optimize its usage by downloading the free user manual, release notes, and other valuable resources from our website manualshive.com.

Share
Download
background image

<HUAWEI> 

display isis spf-tree ipv6 topology Red

                         Shortest Path Tree for ISIS(1)
                         ------------------------------

                               ipv6 topology Red
                               -----------------

         Flags: T-System is on SPF TREE  R-System is directly reachable
                O-System is Overload     D-System or Link is to be deleted
                C-Neighbor is child      P-Neighbor is parent
                G-Cost gets greater      L-Cost gets lower
                H-Nexthop is changed     U-Protocol usage is changed
                V-Link is involved       N-Link is a new path
                S-Link is IGP Shortcut   *-Relative cost

                       ISIS(1) Level-2 Shortest Path Tree
                       ----------------------------------

 SpfNode           NodeFlags  NeighbourNode     LinkCost   LinkFlags    
------------------------------------------------------------------------
>0000.0000.0001.00 T/-/-/-    0000.0000.0003.01       10   C/-/-/-/-/-/-
 0000.0000.0002.01 -/-/-/-    0000.0000.0002.00        0   -/-/-/-/-/-/-
                             >0000.0000.0001.00        0   -/-/-/-/-/-/-
 0000.0000.0002.02 -/-/-/-    0000.0000.0002.00        0   -/-/-/-/-/-/-
                              0000.0000.0004.00        0   -/-/-/-/-/-/-
 0000.0000.0003.00 T/-/-/-    0000.0000.0003.02       10   C/-/-/-/-/-/-
                              0000.0000.0003.01       10   P/-/-/-/-/-/-
 0000.0000.0003.01 T/R/-/-    0000.0000.0003.00        0   C/-/-/-/-/-/-
                             >0000.0000.0001.00        0   P/-/-/-/-/-/-
 0000.0000.0003.02 T/-/-/-    0000.0000.0003.00        0   P/-/-/-/-/-/-
                              0000.0000.0004.00        0   C/-/-/-/-/-/-
 0000.0000.0004.00 T/-/-/-    0000.0000.0003.02       10   P/-/-/-/-/-/-

7.19 Configuring IPv6 IS-IS Auto FRR

With IPv6 IS-IS Auto FRR, traffic on a faulty link can be quickly switched to the backup link
of the faulty link. This ensures that the traffic interruption time is within 50 ms and improves
the reliability of IS-IS networks.

7.19.1 Before You Start

Before configuring IPv6 IS-IS Auto FRR, familiarize yourself with the usage scenario, complete
the pre-configuration tasks, and obtain the data required for the configuration.

Applicable Environment

As the network keeps developing, services such as Voice over IP (VoIP) and on-line video
services require high-quality real-time transmission. Nevertheless, if an IS-IS fault occurs, traffic
can be switched to a new link only after the following processes: fault detection, LSP update,
LSP flooding, route calculation, and FIB entry delivery. As a result, traffic is interrupted for
much more than 50 ms, which cannot meet the requirement for real-time services on the network.

With IPv6 IS-IS Auto FRR, devices can rapidly switch traffic from faulty links to backup links
without interrupting the traffic. This protects traffic and greatly improves the reliability of IS-
IS networks. The NE80E/40E supports IPv4 IS-IS Auto FRR.

IPv6 IS-IS Auto FRR is applicable to the services that are very sensitive to packet delay and
packet loss.

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing

7 IS-IS Configuration

Issue 02 (2014-09-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

624

Summary of Contents for Quidway NE40E






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Quidway NE40E

D-Link DSL-500 Command Reference Manual preview
DSL-500
Brand: D-Link Pages: 15
D-Link DSN-4100 Series Quick Start Manual preview
DSN-4100 Series
Brand: D-Link Pages: 2
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Brand: D-Link Pages: 2
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Brand: Watchguard Pages: 24
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
F.F. Group RO 1600 PLU Original Instructions Manual preview
RO 1600 PLU
Brand: F.F. Group Pages: 56
Alcatel 7270 MSC Specifications preview
7270 MSC
Brand: Alcatel Pages: 4
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
Westermo Viper-012 User Manual preview
Viper-012
Brand: Westermo Pages: 22
Westermo LRW-112 Series Manual preview
LRW-112 Series
Brand: Westermo Pages: 28
StarTech.com PCI555WG Instruction Manual preview
PCI555WG
Brand: StarTech.com Pages: 16
Gigabyte GN-WIKG User Manual preview
GN-WIKG
Brand: Gigabyte Pages: 10
Costar CDC2500LX User Manual preview
CDC2500LX
Brand: Costar Pages: 51
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8

Brands by name

Popular brands

Load more brands