HUAWEI
5
4
Getting Started
Laptop Configuration Requirements
To use the Data Card, the following are required for your laptop:
z
A type II PCMCIA Card slot supporting CARDBUS.
z
A 133 MHZ Pentium processor or above. 500 MHz Pentium or the
microprocessor with higher frequency is recommended.
z
32 MB RAM or above. The memory of 128 MB or above is recommended.
z
30 MB idle hard disk or above.
z
Windows XP
/
2000
/ Vista
operating system.
z
Display resolution of 800
%
600 pixels or above. Display resolution of 1024
%
768 pixels is recommended.
Preparing the Data Card
1.
Take out the HUAWEI 3G Data Card from the protective cover.
2.
As shown in the following figure, insert the SIM/USIM card into the slot
on the back of the Data Card, and make sure the golden contact on the card
is facing downwards.
