Procedure
Step 1
Right-click in the blank area of the Main Topology and choose
New
>
Link
from the shortcut
menu. Then, the
Create Link
dialog box is displayed.
Step 2
Choose
Fiber/Cable
>
Cable
from the left pane.
Step 3
Enter the cable attributes in the panel on the right.
Step 4
Click
OK
. The cable that is already created between the U2000 and the gateway NE is displayed
on the Main Topology.
----End
2.5 Creating a Topology Subnet
To facilitate network management, you can assign the topology objects in the same network area
or with similar attributes into the same topology subnet.
Prerequisite
You must be an NM user with "NM operator" authority or higher.
Background Information
A topology subnet is created only to simplify the user interface and does not affect the operation
of the NEs.
Procedure
Step 1
Right-click in the blank area of the Main Topology and choose
New
>
Subnet
from the shortcut
menu.
Step 2
Click the
Property
tab in the
Create Physical Subnet
dialog box. Set the attributes of the subnet.
Step 3
Click the
Select Objects
tab. Select the created NEs or subnet from the
Available Objects
column. Click
to add the selected objects to the
Selected Objects
column.
NOTE
The information about the
signs in a similar dialog box for selecting objects is
provided as follows:
l
indicates adding the selected objects from the left column to the right column.
l
indicates adding all the objects from the left column to the right column.
Step 4
Click
OK
.
----End
2.6 Configuring the Protection Subnet
The OptiX OSN equipment supports various network level protection schemes, including the
linear MSP.
2 Creating the Network
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
2-14
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-06-30)