manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 322 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 322

Prerequisite

You must be an NM user with "NE operator" authority or higher.

Procedure

Step 1

In the NE Explorer, select an Ethernet board and then choose 

Configuration

 > 

Ethernet

Service

 > 

Ethernet Line Service

 from the Function Tree.

Step 2

Click 

Query

.

Step 3

Select the Ethernet private line service to be deleted and click 

Delete

. Click 

OK

 in the

Prompt

 dialog box that is displayed. Then, a dialog box is displayed, indicating that the operation

is successful, that is, the Ethernet private line service is deleted successfully.

Step 4

Click 

Query

 to check whether the Ethernet private line service is deleted.

Step 5

See 

5.4.2 Deleting SDH Services

 to delete the cross-connections of the Ethernet private line

service.

----End

5.4.4 Deleting EPLAN Services

EPLAN services need to be deleted when the Ethernet boards that are configured with the
EPLAN services need to be deleted or when the configuration of the EPLAN services is incorrect.

Prerequisite

You must be an NM user with "NE operator" authority or higher.

Context

CAUTION

When the EPLAN services are deleted, the VLAN unicast entries and disabled MAC address
entries are deleted.

Procedure

Step 1

In the NE Explorer, select an Ethernet board, and then choose 

Configuration

 > 

Ethernet

Service

 > 

Ethernet LAN Service

 from the Function Tree.

Step 2

Click 

Query

.

Step 3

Select the EPLAN service to be deleted and click 

Delete

. Click 

OK

 in the 

Prompt

 dialog box

that is displayed. Then, a dialog box is displayed, indicating that the operation is successful, that
is, the EPLAN service is deleted successfully.

Step 4

Click 

Query

 to check whether the EPLAN service is deleted.

Step 5

See 

5.4.2 Deleting SDH Services

 to delete the cross-connections of the EPLAN service.

----End

5 Modifying the Configuration Data

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

5-12

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments