Indicator
Status Description
Port link/active/mode
indicator
l
Blinking blue slowly (1 Hz): The interface module is
working in FC mode, and the port link is down.
l
Blinking blue quickly (2 Hz): The interface module is
working in FC mode, and data is being transmitted.
l
Steady blue: The interface module is working in FC
mode, the port link is up, and no data is being
transmitted.
l
Blinking green slowly (1 Hz): The interface module is
working in ETH mode, and the port link is down.
l
Blinking green quickly (2 Hz): The interface module is
working in ETH mode, and data is being transmitted.
l
Steady green: The interface module is working in ETH
mode, the port link is up, and no data is being
transmitted.
l
Steady red: The port is faulty.
l
Off: The port is powered off.
NOTE
The SmartIO interface module supports multiple working modes which need to be adjusted based on the
used optical module. For details, see section "Checking and Setting the Working Mode of SmartIO
Interface Modules" in the
Installation Guide
.
4.2.2.10 12 Gbit/s SAS Expansion Module (Supported by V300R006C10 and later)
An expansion module provides expansion ports that are used for communication between a
controller enclosure and a disk enclosure. The module transfers data between a controller
enclosure and a disk enclosure.
Function
A SAS interface module provides four 4 x 12 Gbit/s mini SAS HD expansion ports that
provide connectivity to disk enclosures. The SAS interface module connects to the back-end
storage array of the storage system through a mini SAS HD cable. When the transfer rate of
the connected device is less than that of the expansion port, the expansion port automatically
adjusts the transfer rate to that of the connected device to ensure the connectivity of the data
transfer channel.
Ports
shows the appearance of a 12 Gbit/s SAS expansion module.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15)
Copyright © Huawei Technologies Co., Ltd.
42