Table 4-2
Checklist for indicators on a controller
No.
Indicator
Status and Description
4
Link/Active/Mode
indicator of the SmartIO
port
l
Blinking blue slowly (1 Hz): The interface
module is working in FC mode, and the port link
is down.
l
Blinking blue quickly (2 Hz): The interface
module is working in FC mode, and data is being
transmitted.
l
Steady blue: The interface module is working in
FC mode, the port link is up, and no data is being
transmitted.
l
Blinking green slowly (1 Hz): The interface
module is working in ETH mode, and the port
link is down.
l
Blinking green quickly (2 Hz): The interface
module is working in ETH mode, and data is
being transmitted.
l
Steady green: The interface module is working in
ETH mode, the port link is up, and no data is
being transmitted.
l
Steady red: The port is faulty.
l
Off: The port is not powered on.
6
Power indicator of the
interface module/Hot
Swap button of the module
l
Steady green: The interface module is running
properly.
l
Blinking green: The interface module receives a
hot swap request.
l
Steady red: The interface module is faulty.
l
Off: The interface module is powered off or can
be hot-swappable.
10
Link/Active indicator of
the management network
port
l
Steady green: The port is connected properly.
l
Blinking green: Data is being transferred.
l
Off: The port is connected abnormally.
12
Speed indicator of the
management network port
l
Steady orange: Data is being transferred at the
highest rate.
l
Off: The data transfer speed is lower than the
highest speed.
13
Running/Alarm indicator
of the backup power
module
l
Steady green: The backup power module is fully
charged.
l
Blinking green (1 Hz): The backup power
module is being charged.
l
Blinking green (4 Hz): The backup power
module is being discharged.
l
Steady red: The backup power module is faulty.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15)
Copyright © Huawei Technologies Co., Ltd.
26