Huawei NE20E-S Series Hardware Description Download Page 219

Page: 219 / 407

7 Boards

Issue ()

Huawei Proprietary and Confidential

217

Product

Slot ID

Earliest Software
Version

NE20E-S8

NSP-A: slot 1 to 8

NSP-B: slot 1 to 8

NSP-C: slot 1 to 8

V800R005C01

NE20E-S8A

NSP-A: slot 1 to 8

NSP-B: slot 1 to 8

NSP-C: slot 1 to 8

V800R008C10

NE20E-S16

NSP-A: slot 1 to 16

NSP-B: slot 1 to 16

NSP-C: slot 1 to 16

V800R005C01

NE20E-S16A

NSP-A: slot 1 to 16

NSP-B: slot 1 to 16

NSP-C: slot 1 to 16

V800R008C10

Appearance

Panel

Table 7-224

Indicators

Indicator

Status Description

STAT

Status indicator

Green:



If the indicator is steady on, the PIC is working properly.

Red:



If the indicator is steady on, the hardware on the PIC is faulty.

Yellow:



If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.

If the indicator is off, the PIC is powered off or is not registered.

Summary of Contents for NE20E-S Series
























































































































































































































































































































































































































Search results

Summary of Contents for NE20E-S Series

Reviews:

Huawei NE20E-S Series, Hardware Description, Page: 219 / 407

Search results

Summary of Contents for NE20E-S Series

Reviews: