Huawei MU509 Series At Command Interface Specification Download Page 208

Page: 208 / 227

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

Internet Service Commands

Issue 04 (2013-01-28)

Huawei Proprietary and Confidential

208

15.10.4

Examples

The value of the transparent transmission timer is set to 0.2 seconds.

AT^IPCFL=5,2

15.11 ^IPFLOWQ–TCP/UDP Flow Queries

15.11.1

Command Syntax

Command

Possible response(s)

^IPFLOWQ[=<link_id>]

In case of an MT-related error:

<CR><LF>+CME ERROR: <err><CR><LF>

^IPFLOWQ?

<CR><LF>^IPFLOWQ:
<link1>,<TX_FROM_USER>,<TX_TO_SOCKET>,<
TX_ACK_SUM>,<RX_FROM_SOCKET>,<RX_TO_
USER>

<CR><LF>^IPFLOWQ:
<link2>,<TX_FROM_USER>,<TX_TO_SOCKET>,<
TX_ACK_SUM>,<RX_FROM_SOCKET>,<RX_TO_
USER>

^IPFLOWQ=?

<CR><LF>^IPFLOWQ: (list of supported
<link_id>s)<CR><LF><CR><LF>OK<CR><LF>

15.11.2

Description

The EXECUTION command is used

o clear the specified TCP / UDP link packet

statistics.

The READ command

is u

sed to query the current TCP / UDP link packet statistics.

15.11.3

Defined Values

<link_id>: specifies the ID of the link. The value ranges from 0 to 5.

0: It

‟s used to clear the statistics for all links in the execution command.

–5: It specifies the link need to clear the statistical data.

<TX_FROM_USER>: an integer, specifying the amount of data received from user.
The maximum value is the (2

-1) bytes.

<TX_TO_SOCKET>: an integer, specifying the amount of data sent to socket. The
maximum value is the (2

-1) bytes.

Summary of Contents for MU509 Series




































































































































































































































Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands

Huawei MU509 Series, At Command Interface Specification

Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands