manualshive.com logo in svg

Huawei MG323, At Command Interface Specification

Share
Download
Huawei MG323 At Command Interface Specification Download Page 45

 

HUAWEI MG323 GSM M2M Module 
AT Command Interface Specification 

Commands for Status Control

 

Issue 02 (2010-11-23) 

Huawei Proprietary and Confidential 

Copyright © Huawei Technologies Co., Ltd.

28

 

3 

Commands for Status Control 

This chapter describes the AT commands for controlling the status of the module.   

3.1 AT+CMER - Command for Setting Event Reporting 

The 

AT+CMER

 command controls the 

+CIEV

 unsolicited reporting that is related to 

AT^SIND

 and 

AT+CIND

 commands. For an event that is registered through 

AT^SIND

 and 

AT+CIND

 commands, if the indicator value related to the event 

changes, unsolicited reporting is performed.   

3.1.1 Querying the Supported Settings for Event Reporting 

Test 
command 

AT+CMER=? 

Function 

Queries the supported settings for event reporting.   

Response 

<CR><LF>+CMER: (list of supported <mode>s), (list of supported 
<keyp>s), (list of supported <disp>s), (list of supported <ind>s), (list of 
supported <bfr>s)<CR><LF> 
<CR><LF>OK<CR><LF> 

 

Parameter description 

<mode>: integer.   

z

 

0 (default value): Unsolicited report codes (URCs) are buffered on the TA. If the 
buffer of the TA is full, URCs are buffered at other locations or the oldest URCs 
are discarded.   

z

 

1: URCs are discarded in TA-TE connection hold state (such as data service 
mode). Otherwise, the event is reported directly to the TE.   

z

 

2: 1: URCs are discarded when TA-TE link is reserved, e.g. in online data mode. 
Otherwise they are forwarded directly to the TE. (This is not supported currently) 

<keyp>: integer; enables key event reporting, which is not supported currently.   

0 Reports 

the 

event. 

 

Summary of Contents for MG323
















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands