HUAWEI ME906J LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Check whether the information on the label of an ME906J is consistent with the
corresponding label shown in Figure 2-4 . There are two kinds of labels for ME906J and
you can find one that is corresponding to the label shown in Figure 2-4 . The label shown in
Figure 2-4 are of the general version. If the label is customized, see the approval sheet.
Use a 2D barcode scanner to read the 2D barcode and check whether the number read
from the barcode is consistent with the IMEI number printed on the label.
2.3 Performance Inspection
Testing software: HyperTerminal
Testing tools: USB cable, PCB for testing modules, PC
The following is the procedure:
Step 1
Use serial port or the USB cable to connect the testing PCB to the PC.
Step 2
Open
Run
and input the path
C:\Program Files\Windows NT
, and
hypertrm.exe
will be displayed as shown in the following figure. Double click
hypertrm.exe
to run
HyperTerminal
.
Step 3
Open
Run
and input
hypertrm
to enter
Connection Description
. Input
ME906J
in
Name
column and select the read telephone icon in
Icon
column as shown in the
following figure.
