Huawei ME60 Series Page 128 Hardware Description Download

Page: 128 / 513

ME60
Hardware Description

1 Hardware Description

Issue 01 (2018-05-07)

119

Indicator

Status Description

board is working properly. If the indicator
blinks green quickly, the board fails to
communicate with the main control board.

ALM

If the indicator is steady red, the PM or
PMU is not working properly. If the
indicator is off, no alarms are reported.

ACT

If the indicator is steady green, the board is
in the active state. If the indicator is off, the
board is in the standby state.

Function

Supporting flexible configuration, dynamic management, and voltage and current detection
functions

Providing power alarms and supporting 485 communication

1.8.5.10 Power System Technical Specifications

-48 V DC

Table 1-79

-48 V DC power system specifications

Item

Description

Number of power modules

16 (full configuration)

Input channels

32 (full configuration)

Maximum input diameter

35mm^2 per input

Input voltage

-40 V to -72 V (rated voltage -48 V/-60 V)

Input current

A maximum of 63 A for an input per
module

Front-end circuit breaker/fuse

63 A to 100 A

Output voltage

53.5 V

Table 1-80

AC power system specifications

Item

Description

Number of power modules

16 (full configuration)

Summary of Contents for ME60 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for ME60 Series

Reviews:

Related manuals for ME60 Series

Brands by name

Popular brands

Huawei ME60 Series, Hardware Description

Search results

Summary of Contents for ME60 Series

Reviews:

Related manuals for ME60 Series

Brands by name

Popular brands