Huawei LUNA2000-5-NHE0 User Manual Download Page 3

Page: 3 / 95

About This Document

Purpose

This document describes the LUNA2000 battery (also referred to as product,

equipment or energy storage) in terms of its overview, application scenarios,

installation and commissioning, system maintenance, and technical specifications.

The LUNA2000 battery consists of a LUNA2000-5KW-NHC0 power control module

and LUNA2000-5-NHE0 battery expansion modules.

Intended Audience

This document is intended for:
●

Sales engineers

●

System engineers

●

Technical support engineers

●

End users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

LUNA2000-(5-30)-NHS0

User Manual

About This Document

Issue 06 (2022-03-01)

Summary of Contents for LUNA2000-5-NHE0
































































































Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands

Huawei LUNA2000-5-NHE0, User Manual

Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands