Huawei IPC6512-Z30 User Manual Download Page 60

Page: 60 / 120

Step 1

Enter the UPnP™ settings interface:

Configuration >Advanced Configuration > Network >

UPnP

Step 2

Check the checkbox to

enable the UPnP™

function.

You can edit the Friendly Name of the speed dome. This name can be detected by corresponding
device, such as a router.

Figure 8-18

Configure UPnP Settings

----End

8.4.10 Configuring NAT Settings

Refer to the following steps to configure NAT settings.

Step 1

Set the port mapping mode.

To port mapping with the default port numbers

Choose

To port mapping with the customized port numbers

Choose

And you can customize the value of the port number by yourself.

Figure 8-19

Modify the Port

Step 2

Click

to save the settings.

----End

8.4.11 Configuring Email Settings

The system can be configured to send an Email notification to all designated receivers if an alarm
event is detected, e.g., motion detection event, video loss, video tampering, etc.

Before you start, Please configure the DNS Server settings under

Basic Configuration >

Network > TCP/IP

Advanced Configuration > Network > TCP/IP

before using the Email

function.

IPC6512-Z30&6522-Z30
User Guide

8 Speed Dome Configuration

Issue 02 (2014-12-25)

Huawei Proprietary and Confidential

Summary of Contents for IPC6512-Z30

























































































































Search results

Summary of Contents for IPC6512-Z30

Reviews:

Related manuals for IPC6512-Z30

Brands by name

Popular brands

Huawei IPC6512-Z30, User Manual

Search results

Summary of Contents for IPC6512-Z30

Reviews:

Related manuals for IPC6512-Z30

Brands by name

Popular brands