Huawei IPC6221-VRZ-SP, Configuration Manual

Page: 21 / 126

Parameter Description
Login name Login name and domain name used to
register the IPC with the video surveillance
platform.
l The value of this parameter is in the
login name@domain name format.
l The login name is the same as the
Device ID by default, and the login
name cannot be modified.
l User-defined the domain name consists
of 10 digits.
Password Password for registering the IPC with the
video surveillance platform.
NOTICE
l The value of this parameter must be the same
as the registration password configured on
the video surveillance platform. If they are
different, the IPC will fail to connect to the
video surveillance platform.
l
To improve security, the password must
consist of 8 to 20 characters and contain at
least two types of the following: digits,
letters and special characters.
Step 4
Click Save .
----End
3.2.3 Setting Parameters for an ONVIF-based Connection
When the ONVIF protocol is used when connecting IPCs to the platform, you need to set the
ONVIF parameters.
Context
If the ONVIF protocol is used when you set connection parameters on the platform, the
corresponding port number is
80 or 8080 . When connecting IPCs to the Milestone platform,
use port 8080 to prevent connection exceptions.
Procedure
Step 1 Choose Settings > System Configuration > Platform Connection Parameters .
The page for setting platform connection parameters is displayed.
Step 2
Set parameters. For detailed parameter description, see Table 3-4 .
IPC6221-VRZ-SP
Configuration Guide
3 Setting Basic Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15