manualshive.com logo in svg

Huawei IPC6123-WDL-A, User Manual

Share
Download
Huawei IPC6123-WDL-A User Manual Download Page 133

In the Device Information interface, you can edit the Device Name.

Other information of the network camera, such as Model, Serial No., Firmware Version,
Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number
of Alarm Output are displayed. The information cannot be changed in this menu. It is the
reference for maintenance or modification in future.

Figure 12-7

 Device Information

12.5 Maintenance

12.5.1 Rebooting the Camera

Step 1

Enter the Maintenance interface: 

Configuration > Basic Configuration> System >

Maintenance

 or 

Configuration > Advanced Configuration> System > Maintenance

.

Step 2

Click 

 to reboot the network camera.

Figure 12-8

 Reboot the Device

----End

12.5.2 Restoring Default Settings

Step 1

Enter the Maintenance interface: 

Configuration > Basic Configuration> System >

Maintenance

 or 

Configuration > Advanced Configuration> System > Maintenance

.

Step 2

Click 

 or 

 to restore the default settings.

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide

12 Others

Issue 02 (2014-12-25)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

125

Summary of Contents for IPC6123-WDL-A




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands