Enabling the Sudden Change of Sound Intensity can detects the change of the sound volume and
source in the environment.
l
Sensitivity: Range [1-100], the smaller the value the more severe the change should be to
trigger the detection.
l
Sound Intensity Threshold: Range [1-100], it can filter the sound in the environment, the
louder the environment sound, the higher the value should be. You can adjust it according
to the real environment.
Arming Schedule is configured to set the time you want the function to be enabled.
Step 1
Click Edit to set the arming schedule.
Step 2
Choose to trigger alarm actions as Notify Surveillance Center and Send Email, Upload to FTP
and Trigger Channel or trigger the Alarm Output.
Step 3
Click
to save the settings.
Figure 8-41
Audio Exception Configurations
----End
8.6.8 Configuring Intrusion Detection
Intrusion detection can set an area in the surveillance scene and once the area is been entered, a
set of alarm action is triggered.
Step 1
Check the Enable Intrusion Detection checkbox.
Step 2
Click Draw Area, and then draw a rectangle on the image as a defense region.
NOTE
When you draw the rectangle, all lines should connect end to end to each other. Up to four areas are
supported.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
8 Network Camera Configuration
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104
