Parameters
Parameter
Description
Value
devicename
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Example:
hinic0
and
hinic1
Usage Instruction
None
Example
# Display the interrupt information reported by the hinic0 hardware module.
[root@localhost ~]#
hinicadm
fm_show
-i hinic0
********no fm info!********
6.1.4.37 Querying and Setting the Status of the Port Auto-adaptation Mode
(self_adaption)
Function
The
self_adaption
command is used to query and set the status of the port auto-adaptation
mode.
Format
hinicadm self_adaption -i
<
devicename
>
-p
<
portid
>
hinicadm self_adaption -i
<
devicename
>
-p
<
portid
>
-s
<
status
> [
-d
]
Parameters
Parameter
Description
Value
devicename
Indicates the name of the
target IN200 in the system.
Example:
hinic0
and
hinic1
portid
Indicates the target port
number.
-
status
Indicates the status of the port
auto-adaptation mode.
l
enable
l
disable (default value)
Usage Instruction
l
If the command contains
-d
, the setting is permanent and takes effect after a restart.
l
If the command does not contain
-d
, the setting is not permanent and will be restored to
the factory setting after a restart.
Huawei IN200 NIC
User Guide
6 Management Tools
Issue 06 (2019-07-27)
Copyright © Huawei Technologies Co., Ltd.
97
