User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-56
7.6
Setting RTCP Alarm Threshold
The real-time transport control protocol (RTCP) packet contains
the statistical results of the round-trip delay, delay jitter and packet
loss ratio of the real-time transport protocol (RTP) channel. A RTP
packet is voice packet generated in a call.
When the operational values of the system exceed the RTCP
packet threshold, the thresholds of the round-trip delay, delay jitter
and packet loss ratio of the RTP channel, or the threshold of the
interval between sending two RTCP packets, an alarm is generated.
The related commands are listed in Table 7-16.
Table 7-16
Commands related to RTCP alarm thresholds
Operation Command
Set RTCP
threshold
IAD2000(config)#
rtcp_para
{
alarmthreshold
alarmthreshold
|
lost
lost
|
delay
delay
|
jitter
jitter
|
timer
timer
}
Show RTCP
threshold status IAD2000>#
show rtcp_para
The parameters of the commands are listed in Table 7-17.
