
Health
Heart rate data broadcasts
1
Enter the app list and go to Settings > HR Data Broadcasts.
2
Read the statement carefully, go to √ > Go workout, select a workout mode, and start a
workout. Your device will then broadcast your heart rate data.
3
To end the workout, press and hold the side button when the screen is on.
4
Press the side button and touch √ to exit heart rate data broadcasts.
Measuring your skin temperature
Skin temperature measurements are mainly used to monitor the changes in the wrist skin
temperature after exercise. After you enable a continuous skin temperature measurement,
your skin temperature will be continuously measured and a measurement curve will be
generated.
•
The product is not a medical device. Temperature measurements are mainly used to
monitor the changes in the wrist skin temperature of healthy people over the age of 18
during and after exercise. Results are for reference only and should not be used as a
basis for medical diagnosis or treatment.
•
During the measurement, wear the device relatively tightly for more than 10 minutes
and stay in a relaxed environment at room temperature (about 25°C). Ensure that
there are no water stains or alcohol on your wrist. Do not start a measurement in an
environment with direct sunlight, wind, or cold/heat sources.
•
After you exercise, shower, or switch between outdoor and indoor environments, wait
30 minutes before you start a measurement.
Single measurement
In the watch's app list, go to Skin temperature > Measure to start measuring your
temperature.
Touch Join study if you are measuring for the first time. If you touch Leave study, you
will need to touch Join study again before you start a measurement. Swipe up on the
Measure screen and touch About study to view more information about the study,
applicable objects and scenarios, and requirements for wearing the device while using
this feature.
Continuous measurement
1
Open the Health app, touch Devices and then the device name, go to Health monitoring,
and enable Continuous skin temperature measurement.
2
In the watch's app list, touch Skin temperature to view the measurement curve.
10