Health management
ECG
•
This feature is only supported after connecting a HUAWEI WATCH GT 2 Pro ECG to an
Android phone.
•
To enable this feature, make sure that the Huawei Health app has been updated to the
latest version. Open the Huawei Health app, touch the Heart card on the Health
screen, and enable ECG.
1
Keep your arm still and wear your watch correctly.
2
Press the Up button of the watch, swipe up and down the screen, and touch ECG.
3
Touch
, select Wrist mode, and follow the onscreen instructions to touch and hold
against the electrode on the side of the watch until the countdown is over.
4
After the measurement is complete, touch Done. Then open the Huawei Health app,
touch the Heart card, and view detailed reports in the ECG app.
•
During measurements, keep your body still, put your arms on a table or on your knees,
and relax your arms and fingers.
•
If your skin is too dry, the measurement may be affected. Use a small amount of water
to moisten your finger and keep the surface of the ECG recorder dry before measuring.
•
An individual measurement lasts for 30 seconds. If the report shows that your ECG is
abnormal, consult a doctor or go to hospital for assistance.
•
Users who are under 18, or pregnant, or with a pacemaker, or have been diagnosed as
having severe arterial stenosis, arrhythmia, or hypertension are not advised to use this
feature.
•
You can pay to read your ECG report online. The corresponding services including ECG
interpretation results and health advice are provided by doctors from the National
Telemedicine and Connected Health Center.
Heart health research
Starting the Heart health research project
1
Open the Heart Health Research app.
•
Open the Huawei Health app, enter the device settings screen, and touch Heart
health research to open the app.
•
Open the Huawei Health app, touch the Heart card on the Health screen, and touch
Heart health research to open the Heart Health Research app.
13
