Huawei GAR-UL00, Faq

Page: 37 / 263

1.22 Why does the Wi-Fi switch become unavailable?
Go to Settings > Wireless & networks > Wi-Fi . Then touch Advanced settings . Disable
Scanning always available . Then, check whether the problem is solved. If not, restart your
phone.
1.23 Why is the Wi-Fi function automatically turned on
after I turn if off?
Go to Settings > Wireless & networks > Wi-Fi . Then touch Advanced settings . Disable
Scanning always available . Then, check whether the problem is solved. If not, restart your
phone.
1.24 Why can't my phone scan any Wi-Fi hotspot?
1. Check whether the hotspot name is hidden. In the router settings, cancel the hotspot
hiding function. It is recommended that you set the English SSID.
2. Use your phone to scan the hotspot near the router (3–5 meters).
3. If no hotspot is found, restart your phone. If the phone still fails to locate any hotspot,
take your phone to an authorized Huawei service center to check the hardware.
1.25 Why can my phone scan the Wi-Fi hotspot only near
the router?
You can restart your phone to check whether the problem can be solved. If the problem
persists, use another phone to scan the hotspot. If this phone can successfully scan the hotspot,
take your phone to an authorized Huawei service center to check the hardware.
1.26 Why does the Wi-Fi device list display the same
hotspot information without refreshing?
You can restart your phone first. If the problem persists, restore the factory settings.
1.27 Why is the confirmation button unavailable after I
enter the Wi-Fi connection password?
Please check whether you have entered an 8-digit password. If no, reset your router's
password. Change the authentication's encryption mode to WPA-PSK or WPA2-PSK, and set
the password to contain 8 numeric numbers. Then try again. You are suggested to select the
option for displaying the password to check whether the entered password is correct.