background image

12 

 

Pacemaker manufacturers recommend that a minimum distance 
of 15 cm be maintained between a device and a pacemaker to 
prevent potential interference with the pacemaker. If you are 
using a pacemaker, use the device on the opposite side of the 
pacemaker and do not carry the device in your front pocket. 

Potentially Explosive Atmosphere 

Power off your device in any area with a potentially explosive 
atmosphere, and comply with all signs and instructions. Areas that 
may have potentially explosive atmospheres include the areas where 
you would normally be advised to turn off your vehicle engine. 
Triggering of sparks in such areas could cause an explosion or a fire, 
resulting in bodily injuries or even deaths. Do not power on your 
device at refueling points such as service stations. Comply with 
restrictions on the use of radio equipment in fuel depots, storage, 
and distribution areas, and chemical plants. In addition, adhere to 
restrictions in areas where blasting operations are in progress. Before 
using the device, watch out for areas that have potentially explosive 
atmospheres that are often, but not always, clearly marked. Such 
locations include areas below the deck on boats, chemical transfer or 
storage facilities, and areas where the air contains chemicals or 
particles such as grain, dust, or metal powders. Ask the 
manufacturers of vehicles using liquefied petroleum gas (such as 
propane or butane) whether this device can be safely used in their 
vicinity. 

Traffic Security 

Observe local laws and regulations while using the device. In 
addition, if using the device while driving a vehicle, comply with the 
following guidelines: 

 

Concentrate on driving. Your first responsibility is to drive safely. 

 

Do not talk on the device while driving. Use hands-free 
accessories. 

Summary of Contents for G1103





















Reviews: