Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 28

Page: 28 / 186

2.4.1 Drive Configurations

Table 2-6 Drive configuration

Configuration

Maximum Drives

Drive Management

Mode

Built-in drive

2
● Slots 1 and 2 support

only M.2 SSDs

● a: The M.2 SSDs come in two sizes 2242 and 2280, and support the SATA

interface.

● Contact your local Huawei sales representative or use the

Computing

Product Compatibility Checker

to determine the components to be used.

2.4.2 Drive Numbering

Figure 2-11 Drive numbering

2.4.3 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and

drive roaming.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

2 Hardware Description

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands