manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 153

Step 7 Select Disabled and press Enter.
Step 8 Press F10.

The Save Changes&Exit dialog box is displayed.

Step 9 Select Yes and press Enter to save the settings.

The server automatically restarts for the settings to take effect.

----End

10.6 Accessing the BIOS

10.6.1 Accessing the BIOS (V3XX or Earlier)

Procedure

Step 1 Log in to the desktop of the server node.

For details, see 

10.3 Logging In to the Desktop of a Server

.

Step 2 On the Remote Virtual Console, click   on the menu bar.
Step 3 Choose Forced System Reset or Forced Power Cycle.

The Select an Option dialog box is displayed.

NO TICE

● A forced restart or power cycle may cause data loss or program damage.
● Before performing a forced restart or power cycle, ensure that no service

interruption risk exists.

Step 4 Click Yes.

The server node starts to be forcibly restarted or power cycled.

Step 5 During the restart, press Delete or F4 when the information shown in 

Figure

10-35

 is displayed.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

10 Common Operations

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

144

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands