manualshive.com logo in svg

Huawei FusionServer Pro CH121 V5 V100R005, Maintenance And Service Manual

Introducing the Huawei FusionServer Pro CH121 V5 V100R005, a cutting-edge server designed for seamless performance. Ensure top-notch maintenance and service with our comprehensive Maintenance and Service Manual, available for free download at manualshive.com. Accessible, informative, and essential for optimizing your server's potential.

Share
Download
background image

3.13 Removing a SAS/SATA Drive

NOTE

l

The SATA or SAS drives support hot swap.

l

If the drive to be removed has no operating system installed, you can remove it without
powering off the compute node.

l

If the drive to be removed has the operating system installed and is in a RAID array with
redundancy, you can remove it without powering off the compute node.

l

If the drive to be removed has the operating system installed but it is not in a RAID array or it
is in a RAID array without redundancy (for example, RAID 0), power off the compute node
before removing it.

l

The SAS/SATA drives support RAID configuration.

l

If the drive to be removed is not in a RAID array or is in a RAID array without redundancy
(for example, RAID 0), back up the data on the drive before removing it.

l

If the drive to be removed is in a RAID array with redundancy, you do not need to back up
data before removing it.

Procedure

Step 1

Determine the slot and position of the drive.

Figure 3-21

 Positions of drives

Step 2

Check the running status of the drive by observing its indicators.

For details, see 

SAS/SATA Drive Indicators

.

Step 3

Determine whether the drive needs to be removed.

l

If yes, go to 

Step 4

.

l

If no, rectify the drive fault.

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide

3 Basic Operations

Issue 06 (2019-08-10)

Copyright © Huawei Technologies Co., Ltd.

28

Summary of Contents for FusionServer Pro CH121 V5 V100R005

































































































































































































Reviews:

No comments

Related manuals for FusionServer Pro CH121 V5 V100R005

Barracuda Networks Network Quick Start Manual preview
Network
Brand: Barracuda Networks Pages: 2
D-Link DES-3526 - Switch - Stackable Manual preview
DES-3526 - Switch - Stackable
Brand: D-Link Pages: 258
H3C s5800 series Quick Start Manual preview
s5800 series
Brand: H3C Pages: 33
H3C S5500-SI Series Operation Manual preview
S5500-SI Series
Brand: H3C Pages: 1217
3Com MSR 50 Series Configuration Manual preview
MSR 50 Series
Brand: 3Com Pages: 2443
H3C SR6600 Series Installation Manual preview
SR6600 Series
Brand: H3C Pages: 3
H3C SR6616 Installation, Quick Start preview
SR6616
Brand: H3C Pages: 4
Oracle B31003-01 User Manual preview
B31003-01
Brand: Oracle Pages: 112
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
Avaya ERS 5510 Technical Configuration Manual preview
ERS 5510
Brand: Avaya Pages: 73
CalAmp Viper 100 User Manual preview
Viper 100
Brand: CalAmp Pages: 115
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
MA lighting 8Port Node Quick Manual preview
8Port Node
Brand: MA lighting Pages: 49
2N Telekomunikace ATEUS STARGATE User Manual preview
ATEUS STARGATE
Brand: 2N Telekomunikace Pages: 67
IceTech POD-51EH-C541U-12 Operating Instructions Manual preview
POD-51EH-C541U-12
Brand: IceTech Pages: 8
Intel IXP28 Series Manual preview
IXP28 Series
Brand: Intel Pages: 154
Handicare DX REM 420 User Manual preview
DX REM 420
Brand: Handicare Pages: 60
Zalip CDE570AM-U User Manual preview
CDE570AM-U
Brand: Zalip Pages: 76

Brands by name

Popular brands

Load more brands