Huawei FusionServer Pro 2288H V5, User Manual

Page: 97 / 177

l
Connect the other cable connector to the peer device based on the network plan.
l Connect the new network cable to the same port as the removed one.
l Connect the network cable to the network port securely.
Step 7 Check whether the new network cable is functioning properly.
Power on the device. Check whether the communication with the peer device is normal by
running the
ping command.
l If yes, bind the new network cable with other cables.
Bind the new network cable in the same way as the existing network cables. You can
also remove all existing cable ties and bind all network cables again if necessary.
l If no, check whether the network cable is damaged or whether the connector of the
network cable is not securely inserted.
----End
7.2.6.4 Connecting a Cable to an Optical Port
Procedure
Step 1
Determine the model of the new cable.
You can use an optical cable or an SFP+ cable to connect to the optical port.
Step 2 Number the new cable.
l The number of the new cable must be the same as that of the old one.
l Use the same type of labels for the optical cable.
–
Record the name and number of the local device to be connected on one side of the
label, and those of the peer device on the other side.
–
Attach the label 2 cm (0.79 in.) away from the end of the optical cable.
Step 3 Lay out the new cable.
l
Lay out the new cable in the same way as the old one.
For example, if the old cable is laid out in underfloor cabling mode, so is the new cable.
l Lay out optical cables or SFP+ cables in the cabinet based on installation requirements.
You are advised to arrange cables in the same way as existing cables. Ensure that cables
are routed neatly and undamaged.
l Separate optical cables or SFP+ cables from power cables and signal cables when laying
out the cables.
l The minimum bend radius of an optical cable or SFP+ cables is 4 cm (1.57 in.).
l Ensure that optical cables or SFP+ cables are laid out for easy maintenance and capacity
expansion.
l Optical cables must be bound using cable ties. Ensure that:
– Optical cables are bound closely, neatly, and straight.
– Cable ties are in even distance and fastened properly.
Step 4 Connect the cable to an optical port.
l When you use an optical cable:
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 89