Huawei FusionServer Pro 2288H V5 User Manual Download Page 147

Page: 147 / 177

Figure 9-19

Entering the BIOS password

Step 6

Enter the BIOS password.

The default BIOS password is

Admin@9000

Press

to alternate between the English (US), French, and Japanese keyboards.

Use the mouse to open the on-screen keyboard and enter the password.

For security purposes, change the administrator password periodically.

The system will be locked if an incorrect password is entered three consecutive times. You can
restart the server to unlock it.

The Setup Utility program is started.

Step 7

Select

BIOS Configuration

by pressing arrow keys.

The

Main

screen is displayed.

----End

9.7 Clearing Data from a Storage Device

Scenarios

Use the Linux

badblocks

command to clear data on a storage device. Parameters are specified

to overwrite data on the storage device.

FusionServer Pro 2288H V5 Server
User Guide

9 Common Operations

Issue 08 (2019-10-30)

139

Summary of Contents for FusionServer Pro 2288H V5


















































































































































































Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands

Huawei FusionServer Pro 2288H V5, User Manual

Search results

Summary of Contents for FusionServer Pro 2288H V5

Reviews:

Related manuals for FusionServer Pro 2288H V5

Brands by name

Popular brands